Any kind of machinery products in use process we must in accordance with the normal way of operation, so as to ensure the machine working normally and our own safety, normal operation is quite important for copper platoon processing machine operators, can also extend the service life of copper platoon processing machine.

铜排加工机:http://www.rxskjx.com

Copper platoon processing machine

　　首先,操作人员要按照铜排加工机操作说明书来操作,不得违规操作造成人员、设备的损伤、损坏.铜排加工机的模具以及配件要保持完好.熟悉机器的结构、性能和操作方法.

First of all, the operation personnel to operate according to the copper platoon processing machine operation manual, shall not violate compasses operation personnel, equipment damage, damage, copper platoon processing machine mold and accessories to keep intact. Familiar with the structure of the machine, the performance and operation method.

　　其次,安装、调试或拆卸模具,必须由熟悉机器的人员按照规定的规程进行.当机器开动时,切勿把手或身体的一部分放在上下模之间,以免发生事故.

Second, installation, debugging, or remove the molds, must be familiar with the machine's personnel shall be carried out in accordance with the prescribed procedures. When the machine start, do not handle or part of the body in between the upper and lower mold, so as to avoid an accident.

　　最后,应定期检查刀片和冲模刃口锋利程度,入发现刃口变钝,应及时修磨或更换.保持油液清洁几油路通畅,铜排加工机每班给各单元运动部件加润滑油.必须保证动作灵活与位置正确电气与液压元件,发现不正常现象时必须立即停车检查.不工作时关断各单元工作按钮,关断操作盘上的电源开关.

Finally, should be regularly check the blade and die sharp edge, the found a dull edge, should be timely sharpening or replacement. Keep the oil clean a few oil unobstructed, add lubricant to each unit in the moving parts in each shift. Must ensure that the flexible motion and position of electric and hydraulic components, correct found abnormal phenomenon must immediately stop check. Don't work button, shut off the unit to shut off the power switch on the panel.