We use the time winding machine will encounter some problems, especially with winding machine a few years later would be more prone to various problems. Our problems are generally divided into 2 categories.

 

1.是硬件问题。2是设置问题。

 

The 1 is a hardware problem. The 2 is to set a question.

 

首先我们要看状况分析问题的所在。变压器绕线机比如以自动绕线机我们举例几个常见的问题。

 

We want to see the situation analysis problem first place. Such as automatic winding machine and we illustrate several common problems.

 

1、拍线不整齐。我们要根据情况分析是在正常加工的时候出现问题，还是换了产品调试过之后出现的问题。前者一般属于硬件问题。后者一般是设置问题。硬件问题一般是工装夹具松动、排线机构紧固螺丝松动、排线机构润滑不佳导致步进电机负载过重步进电机失步所引起排线不整齐。

 

1, strings not neat. We according to the situation analysis is the time in the normal processing of the problems, or exchange the product after debugging problems. The former belongs to the hardware problem. The latter is generally set problems. The hardware problem is generally fixture loosening fastening screw loosening, a winding mechanism, a winding mechanism due to poor lubrication of stepping motor overload of step motor caused by irregular line.

 

2、主轴停车位置不精准。主轴停车位置不精准一般都是由于刹车故障引起。比如刹车片松动，或者刹车片磨损引起。也与刹车时间的设置有关，刹车时间过短也会出现主轴停车位置不准。需要更换刹车片或。进行刹车时间调整。

 

2, the parking position is not accurate. The parking position is not accurate in general are due to brake failure caused by. Such as brake loose, or brake pad wear caused by. Also related to braking time, braking time is too short will also appear spindle parking location not. Need to replace the brake pads or. Brake adjustment.

 

3、绕线圈数不准、绕线机如出现计数不准，http://www.rxskjx.com/一般由于传感器、或控制器的硬件问题、出现这种情况绕线机无法工作，一般是通知生产厂家进行维修解决。

 

3, coil number are not allowed, winding machine such as inaccurate counting, generally due to the sensor, or hardware problem, appear this kind of circumstance winding machine can not work, the general is to inform the manufacturer for repair solution.